Furnace maintenance service in Studio City with Studio City HVAC Repair is a booked visit with a price you know ahead of time. A technician goes through the parts that leave a house cold, tells you what passed and what is wearing, and writes a quote for any part that needs work. Ask for the visit and the written quote here and we will set a time.
Phones are answered 24/7, and same-day service is available, so you can call when the furnace is on your mind instead of waiting for the first cold night.
What a furnace tune-up costs
Pricing is upfront: annual tune-ups run $109 to $320 depending on system type. A basic furnace in an easy closet sits at the low end. A system that is harder to reach or built differently sits higher. See our heating maintenance service for what each visit covers.
That figure covers the inspection. If the visit turns up a worn part, it is a separate written quote and you approve it before we touch anything. These are the figures for the parts a tune-up can point to:
| Part | Price |
|---|---|
| Igniter replacement | averages $219 |
| Flame sensor cleaning or replacement | $109 to $320 |
| Blower motor or capacitor work | $119 to $1,600 |
The blower line is wide because part sizes differ. A capacitor is a small component and a motor is a larger one, and the technician tells you which you need before you approve anything.
What the visit looks at
The visit runs the same list every time, so nothing is skipped and you can compare one season to the next.
- The burners and the heat exchanger area are inspected.
- The igniter is tested and the flame sensor is cleaned or checked.
- The blower motor, the capacitor and the filter are checked.
- The thermostat call and a full heating cycle are verified.
- The flue is inspected on closet and attic furnaces.
- The carbon monoxide alarms are checked to see that they are present, since California law requires them in homes with a fuel-burning appliance.
You finish with a plain list of what passed and what is wearing. A weak igniter or a coated flame sensor shows up on that list while it is still a small fix, instead of on the night the furnace will not light.
How the location of the furnace sets the visit
Furnaces in Studio City sit in hall closets, garages and attics. A garage unit is simple to open. A tight closet or a low attic takes longer to get into, and that is part of why the tune-up has a range and not one number.
When you book, tell us where the furnace sits and what it has been doing. If it has short-cycled, been slow to light or gone quiet for a stretch, say so. We plan the visit around it and bring common parts, so a small repair can often be finished while the tech is already there.
Tune-up now, or repair if it has already failed
If the furnace works, the tune-up is the right call. If it has already stopped, skip the tune-up and book a heating repair visit. The same technician tests the same parts and writes the estimate for the one that failed, so you are not paying for two trips.
Repair comes first on every call. A replacement comes up only if the testing shows a repair would not pay off, and you see the results before you decide. If that happens, our heating installation page explains how a new furnace or heat pump is sized to the house, and the work is permitted through LADBS.
Booking and what to have ready
Call, or send the form. Give us the address in Studio City, the location of the furnace and anything it has done that worried you. You get an arrival window when the visit is booked.
We also take furnace visits in nearby Sherman Oaks, Burbank and Glendale. Natural gas in Studio City is SoCalGas and electric service is LADWP. If you ever smell gas, leave the house first and call SoCalGas or 911 from outside.
FAQ
How much is furnace maintenance service in Studio City?
Annual tune-ups run $109 to $320 depending on system type. Any part that needs work is quoted in writing separately, and you approve it before the work starts.
What happens if the tune-up finds a bad part?
You get a written quote for that part. An igniter averages $219 and a flame sensor runs $109 to $320. Nothing is replaced because a checklist said so. A part is replaced when the readings show it is failing.
Do you check carbon monoxide alarms?
We check that the alarms are present, since California law requires them where a fuel-burning appliance is installed. If the furnace itself is the concern, the inspection covers the burners, the heat exchanger area and the flue.
Can I book a furnace tune-up the same day?
Same-day service is available. Call and tell us where the furnace sits, and we book the soonest visit we can make.
Should I book a tune-up or a repair?
Book the tune-up if the furnace is working. Book a repair if it has stopped, clicks without lighting or blows cold air. The repair visit tests the same parts and ends with a written estimate for the fix.
Call (877) 549-6850 to book your furnace maintenance visit and get the price in writing.
Need Professional HVAC Service?
Our HVAC-experienced technicians are ready to help with all your AC and heating needs. Contact Studio City HVAC Repair today for expert service throughout the the east San Fernando Valley service area.
